About 20 seconds after the last motion is detected, the motion sensor wall light will switch to its mode in the third picture state.
Enhanced PIR motion inductor
AURAXY outdoor solar lights motion sensor enhanced PIR motion sensor has high detection sensitivity, 120° sensing angle and 19.7ft sensing distance.
When you need it, it illuminates your way home, escorts you home, and makes your home brighter. Your life is more convenient.
- Lumen: 260LM MAX
- IP44 outdoor-proof
- Kelvin: Main light= 4000K normal white, Back light=3000K warm white
- Solar charging: 5-7 hrs/day by sun
- Detection angle: 120°
- Light angle: 120°(Asymmetric lens)
AURAXY motion sensor sloar wall lights outdoor is ideal for night lighting for front door, backyard, garage, deck, garden,fence,etc.
During the day, the solar panel converts solar energy into electricity and stores it with the rechargeable battery.
It takes up to 5-7 hours of sunlight for a full charge.The recommended installation height is 6.5-13 ft.
Sunlight charging time and lighting time varies with daylight intensity, geographic location, weather conditions, season and other conditions.
In winter, it is normal for the sunlight not to get enough energy from sunlight, so usually the brightness is lower and the working time at night is shorter.
Push the Mode Switch on OFF position, the lamp is turned OFF completely. The solar cells will charge the battery without activating the lamp. Leave the lamp in this position for at least 2 or 3 sunny days so the battery can be fully charged before using it.
This lamp is intended only for outside use.
Please read the instructions before use.
|Product Dimensions||4.72 x 2.56 x 4.33 inches|
||Acrylonitrile Butadiene Styrene|
|Special Features||Motion sensor, Back ambient light|
|Power Source||Solar Powered|
|Luminous Flux||260 Lumen|
|Color Temperature||Main light= 4000K normal white, Back light=3000K|